Company Introduction
Founded in 1984, FULONG covers 45,000 square meters with over 350 staff. As a national high-tech enterprise now, we passed ISO9001, TS16949. With national lab and municipal innovation center, we set over ten national and trading standards. What's more, annual output is more than 10 million pieces of belts and 600 thousand pieces of pulleys. Matched belts and pulleys make sure the life-span of products longer.
Product Description
Trapezoidal Tooth Profile
Curvilinear Tooth Profile
National Lab
Company Workshops
Founded in 1984, FULONG covers 45,000 square meters with over 350 staff. As a national high-tech enterprise now, we passed ISO9001, TS16949. With national lab and municipal innovation center, we set over ten national and trading standards. What's more, annual output is more than 10 million pieces of belts and 600 thousand pieces of pulleys. Matched belts and pulleys make sure the life-span of products longer.
Product Description
TYPE | SUPPLY CHARACTERISTIC |
MXL XXL XL L H XH XXHT2.5 T5 T10 T20 AT5 AT10 AT20 HTD:2M 3M 5M 8M 14M 20M STS:S2M S3M S4.5M S5M S8M S14M RPP:RP2M RP3M RP5M RP8M RP14M |
1.Company leading products with more than 4000 moulds. 2.Cutting or provide sleeve according to customer's requirement. 3.Anti-static,oil, heat-resistant,low temperature resistance ect. |
Trapezoidal Tooth Profile
Type | Pitch Pb(mm) | Tooth height ht(mm) | Belt thickness hs(mm) | Angle β° | Details |
MXL | 2.032 | 0.51 | 1.14 | 40 | Details |
XXL | 3.175 | 0.76 | 1.52 | 50 | Details |
XL | 5.080 | 1.27 | 2.30 | 50 | Details |
L | 9.525 | 1.91 | 3.60 | 40 | Details |
H | 12.700 | 2.29 | 4.30 | 40 | Details |
XH | 22.225 | 6.35 | 11.20 | 40 | Details |
XXH | 31.750 | 9.53 | 15.70 | 40 | Details |
T2.5 | 2.50 | 0.70 | 1.30 | 40 | Details |
T5 | 5.00 | 1.20 | 2.20 | 40 | Details |
T10 | 10.00 | 2.50 | 4.50 | 40 | Details |
T20 | 20.00 | 5.00 | 8.00 | 40 | Details |
AT5 | 5.00 | 1.20 | 2.70 | 50 | Details |
AT10 | 10.00 | 2.50 | 5.00 | 50 | Details |
AT20 | 20.00 | 5.00 | 9.00 | 50 | Details |
Curvilinear Tooth Profile
Tooth Profile | Type | Tooth Pitch (mm) | Tooth Height (mm) | Belt Thickness (mm) | Details |
HTD |
2M | 2 | 0.75 | 1.36 | Details |
3M | 3 | 1.17 | 2.40 | Details | |
5M | 5 | 2.06 | 3.80 | Details | |
8M | 8 | 3.36 | 6.00 | Details | |
14M | 14 | 6.02 | 10.00 | Details | |
20M | 20 | 8.40 | 13.20 | Details | |
STPD/STS |
S2M | 2 | 0.76 | 1.36 | Details |
S3M | 3 | 1.14 | 2.20 | Details | |
S4.5M | 4.5 | 1.71 | 2.81 | Details | |
S5M | 5 | 1.91 | 3.40 | Details | |
S8M | 8 | 3.05 | 5.30 | Details | |
S14M | 14 | 5.30 | 10.20 | Details | |
RPP/HPPD |
2M | 2 | 0.76 | 1.36 | Details |
3M | 3 | 1.15 | 1.90 | Details | |
5M | 5 | 1.95 | 3.50 | Details | |
8M | 8 | 3.20 | 5.50 | Details | |
14M | 14 | 6.00 | 10.0 | Details |
National Lab
Company Workshops